1 / 3
gnarly Rambo tall enclosure lid with pass thru — zdjęcie 1
1 / 3

gnarly Rambo tall enclosure lid with pass thru

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a 10mm taller lid for the Gnarly Rambo Archim Case by Allted. I made this because the usb right angle cable I…

Ocena
0 / 5
Polubienia
1
Pobrania
7
Wydruki
0
Wyświetlenia
112
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a 10mm taller lid for the Gnarly Rambo Archim Case by Allted.

I made this because the usb right angle cable I have installed that connects to a Raspberry pi causes interference with the stock lid.

Category: 3D Printer Accessories

Tagi