Still Water Horse Head
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Decorative horse head that is drinking some water
- Ocena
- 5 / 5
- Polubienia
- 118
- Pobrania
- 823
- Wydruki
- 10
- Wyświetlenia
- 3293
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution
The design is from a 3D scan of Still Water. Still Water is a 2011 outdoor bronze sculpture of a horse's head by Nic Fiddian-Green, located at Marble Arch in London, United Kingdom.
All credits goes to prenonpadrix that created this beautiful base for the horse head but did not create a remix so the files are hard to find - they are in his comments.
The only thing I did was publishing the G-code and the PrusaSlicer Project file to allow for an easy reprint. What I did to print it:
- Moved the head slightly lower into the water to increase the stability
- Moved seam to the back
- Used variable layer height to get the best print details and a decent print time
- Reduced infill to only structural parts
- Added a draft shield to prevent (reduce) warping
Additional print parameters:
- Print in ABS
- .4 Nozzel
- .15 mm print profile
- No support required
Note: The cover photo is not mine. It is from prenonpadrix and is post processed with Acetone vapor. It also contains a wooden base. All files from his print comment are included in this remix.