Prusa XL Screen Guard for Injection Molded Screen (w/ holders and wire cutout)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prusa XL Screen Guard for Injection Molded Screen. Added clearance hole for ribbon cable and tool holders
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 36
- Wydruki
- 3
- Wyświetlenia
- 140
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Great job to the original designer, good fit around the screen and particularly how tight to the LEDs it is. The only issue I had was the screen's ribbon cable and ground cable had no room to squeeze by. I could mount the original, but I it would flex the bottom crossbar. So I simply removed a space for the cables. In other models I have seen a Calibration Pin and Dock Screw mini-wrench holder so I built models for these and put them in as well.
Printed in Prusament Galaxy Black PLA, IIID MAX Crystal PLA+ and used BVOH for nice tight supports in the overhangs.