TRS(Headphone) 3.5mm Male Dummy Plug
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A friend of mine wanted something to plug the headphone port on his iphone since it gets used in a very dirty…
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 645
- Wydruki
- 5
- Wyświetlenia
- 2209
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
A friend of mine wanted something to plug the headphone port on his iphone since it gets used in a very dirty environment and he doesn't use the headhpone port that often. So I modeled up this dummy plug which I modeled off of a 3.5mm TRS(3 pin) Male ipod headphone connector.
I tested this in my iphone, ipod, and computer headphone jacks and it worked in all of them.
Due to their small size it would be a good idea to print multiples of these at one time to give each a chance to cool more before the next layer is added. I was able to print these without using a raft and used the multiple function in skeinforge to print 6-8 out at a time.
Category: Other