1 / 2
Mk6+ Safety Cutoff Board Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This will allow you to mount the MK6+ safety cutoff board to the z-platform without having to drill any holes in the…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 91
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
This will allow you to mount the MK6+ safety cutoff board to the z-platform without having to drill any holes in the side of the platform.
Instructions
(1) Mount Safety Cutoff board to this using 2 M3x20 bolts, 2 M3 nuts, and 2 spacers(I used two m3 nuts since I didn't have any 1/8 spacers on hand). The spacers could have been printed into the part but I wasn't sure which side I was going to mount the board on so I just left them out.
(2) Mount to Z-Platform.
Category: Other