90 degree Mirror Supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is something I designed so I could hold my lab mirrors at 90 degree angles and create an optical cloaking device.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 92
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution
This is a set of mirror jigs to help support mirrors when orienting them in a 90 degree corner. I had to add a little tape to fully secure them, and they will need a bit more alignment by hand to have a perfect reflection and make things disappear.
The physics behind the experiment is detailed here: https://people.ee.duke.edu/~drsmith/transformation-optics/cloaking.htm
You will need to print 2 of each minimum. These were designed for mirrors 3mm thick, with thicker or thinner mirrors, you can scale the model up or down.
Enjoy!