1 / 2
Soldering station for USB C soldering irons (ts-100 and clones alike)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small station that will house the stock solder tube, 12 tips, flux canister or sponge and a solder spool
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 109
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Simple and easy to print model requring no supports in either PLA or PETG, PETG would be recommended due to temp resistance, uses the stock iron bracket from a ts 100 clone (GVDA 65w usbc iron). Has screw holes if you desire to bolt it down to your desk or some wood to add some weight. Stores 12 tips, the cyllinder to hold the solder spool is meant for 20mm spools. and the flux/sponge holder for 61.8mm tins.