Wiring Protector for Mobula 8 with DJI 03 Air Unit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cable bay to protect the DJI cables
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 267
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
My friend crashed his Mobual 8 drone that had been factory fitted with the DJI 03 Air Unit. When he brought it to me for repair I found that the “factory” build had allowed the Air Unit to Flight Controller wires to move into the path of a propellor blade where they had been cut, and the camera to Air Unit cable had also been severed where it had been crushed between the camera and the Air Unit.
I designed this “spacer” which retains the Air Unit and camera cabling safely between the Air Unit and the flight controller, and also corrects for the different mounting point levels (which the factory build had not resolved). Although it makes the drone slightly taller and 5 grams heavier we have not noticed any change in the way the drone flys, and hopefully he will not be destroying the cables in future crashes.
The spacer was printed in PLA+ with a .4mm nozzle and .2mm layer height using 25% infill and “grid” supports as required. You will need 4 off M2 x 12mm screws (using the original nuts) to fix the spacer between the drone and Air Unit frames.