Mecharoach/Dogface 03 Cinewhoop Accessories
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Happy to share my very first set of custom models for the Mecha/Dogface O3 3" cinewhoop drone designed by Dr. Quads!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 137
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Printing Recommendations:
Mecha _SUPERTHIN PROPGUARDS_Sonar Mount
Material: Polymaker PolySonic Pro PLA
Nozzle: .4mm
Layer Height: .25mm
Line Width Settings:
Walls: 3 walls
Top/Bottom Shells: 3 or 4. Your choice on surface patterns
Speed: See Below. Although this material can achieve nice looking print at very high speeds, it's still recommended to print a bit slower than it's fastest settings for the best surface finish.
Fill: 15% Gyroid
Supports: Yes, but only need very few
Mecha_BACKDOOR _XT60 GM10 mini gps_compass + Mecha_DJI O3_WIDE ND Cam Holder + MTF-01_Sonar Shell
Material: Overture High Speed TPU or SainSmart Matte TPU
Nozzle: .4mm
Layer Height: .2mm
Line Width Settings:
Walls: 3 walls
Top/Bottom Shells: 3 or 4. Your choice on surface patterns
Fill: 15% Gyroid
Speed: Low and Slow just like good BBQ
Supports: Yes, Organic or Tree