Anthead Toolhead - Tridex Double Trident LED Logo (Unofficial)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom Tridex logo. I have only modified the main body for standard flow with the Orbiter 2 mounting holes (SF + O2).
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 878
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
A custom Tridex logo for the Anthead toolhead.
I have only modified the main body for standard flow (SF) with the Orbiter 2 mounting holes (O2). If you want this same design for another main body, let me know and I'll see when I can get it done.
There are two Diffuser Base files. The one labeled “taller” sticks out a tiny bit more from the main body, but might be slightly more difficult to install. However, I'm personally using the taller version and had no issues installing it.
I know this works with Anthead CAD versions v68 through v72, and it's likely it works with earlier or later versions, but those are the only ones I have tested so far. If you notice any major changes to the Mainbody, let me know in a comment and I can update this easily.
You can find more information on the toolhead this is based on here: https://github.com/PrintersForAnts/AntHead/tree/main?tab=GPL-3.0-1-ov-file#readme I take no credit for the original design of the toolhead, all I did was add a new logo cutout.