Industrial light Base & E12 Light Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Update 3/11/19 4:56pm EST The correct STL files re-uploaded
Original https://www.thingiverse.com/thing:1688024
The Base was inspired by a cast iron black pipe flange
The Insert allows the installation of a US E12 Socket.
I printed the Base with 100% infill, you could print with less, but you may get a texture on the top layer from the gap fill underneath.
The Insert was printed wtih 15% infill
It is a friction fit
Tight tolerances, ensure your printer is set-up properly
Note: Printing the cage from the original, only would print correctly at a low temp, 2 perimeters and 10% infill.
E12 Socket https://smile.amazon.com/gp/product/B00X49BVV6/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1
Wifi E12 LED App Controlled Bulb https://smile.amazon.com/gp/product/B07GBXSDNQ/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1
Cord https://smile.amazon.com/gp/product/B000UTE278/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1
Category: Electronics