UM690 MiniForum Case Fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
UM690 case mod for extra cooling for NVME M.2 and Memory
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 574
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
This adds an 80x10.7 fan to the UM690 minisforum for cool off the NVME and Memory. This design will reuse the bottom of the PC and it will snap together. It's a two piece design that needs to be glued together. The buck converter takes the 19V input and steps it down to 12V (also adjustable for a lower voltage for less fan noise). The converter also has an enable pin that can be wired to the USB allowing trigging on and off (i decided to let it run 24/7).
*****Maybe possible to use SSD, haven't tested*****
Temp Test was done with cinebench 30 min runs
Stock = memory 64.3C, 63.8C and NVME 66C
Fan Mod = memory 43.5C, 38.3C and NVME 49C
Parts
small buck converter
https://www.amazon.com/dp/B08Q3PMJTT?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
Fan 80mm x 10mm
https://www.amazon.com/dp/B0816JSZ3P?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1