1 / 10

DSLR Film Scanning Stand

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A stand to hold your camera while you scan 35mm and 120mm film.

Aktualizacja u źródła: 19 mar 2025

Informacje o modelu

I printed everything out of Creality PETG. I used the print settings recommended on the roll of filament and that really helped reduce stringing.

For extra parts to complete this build you will need:

-1 x 2ft long 1in x 1in 80/20 (I ordered on McMaster Carr)

-1 x 3/8-16 x 2ft long threaded rod

-3 x 3/8-16 standard nuts

-2 x Ball Bearing, Shielded, Trade Number R6-2Z, for 3/8" Shaft Diameter

-1 x Ball Bearing, Shielded, Trade Number R2-2Z, for 1/8" Shaft Diameter

-4 x End-Feed T-Slotted Framing Fasteners Nut for 1" and 25mm Rail, 10-32 Thread Size, 0.15" Thick

-4 x 10-32 flat head cap screws for the 80/20

-4 x ¼-20 cap screws to attach the slide to the base plate

-1 x 3/8-26 cap screw to attach tripod head

-1 x tripod head (I used Sirui K-10x Ball Head)