1 / 3
Print-In-Place Tie Rod for Turbojet Variable Nozzle — zdjęcie 1
1 / 3

Print-In-Place Tie Rod for Turbojet Variable Nozzle

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is the printable version of the tie rods used in linus3d's Afterburner & Variable Nozzle, based on Dan Lee's model.

Ocena
0 / 5
Polubienia
15
Pobrania
112
Wydruki
0
Wyświetlenia
459
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Engineering
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Print-in-place rod end for Afterburner & Variable Nozzle. 

Linus3d's model is amazing. I wanted to print the rod ends and Dan Lee's model was perfect, but printed M3 rods to connect the ends turned out to be too fragile. In order to avoid sourcing metal M3 rods, I remixed the model so it fits the petals and ring perfectly while being strong enough to deal with the rotation.

Printed on a Voron 2.4r2 with a 0.4mm nozzle on a PrusaSlicer default 0.1mm height profile.

  • Supports enabled (build plate only)
  • 0.1mm for best result