10Kg Spool Roller Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Roller Stand for oversized Filament Spools
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 80
- Wydruki
- 0
- Wyświetlenia
- 684
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This was designed for a IC3D 10kg roll of PETG.
After my first assembled trial run, I realized I needed a spacer of sorts to hold the roller frames a set distance apart. Alternatively, you could probably just use rubbery feet.
Print in whatever filament you want.
Rollers should be printed with supports touching build plate for the 608 bearing cutout.
Everything should be printed with 4 perimeters since that's where the strength is.
The pin should be printed solid, either all perimeter, or 100percent infill, Printer's choice.
You'll need 8 of the 608 Bearings (skateboard/fidget spinner). They're a snug fit, and I had to use a little scrap of wood to tap mine into place.