Vivitar VPT-360 Quick Release plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a quick release head for a tripod I picked up at a thrift store, a Vivitar VPT-360, long since discontinued…
- Ocena
- 3 / 5
- Polubienia
- 2
- Pobrania
- 42
- Wydruki
- 2
- Wyświetlenia
- 336
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed a quick release head for a tripod I picked up at a thrift store, a Vivitar VPT-360, long since discontinued and parts are no longer available. It took about six iterations to get it right and I could still tweak the back edge if I wanted to get it perfect, but it works and works well.
Print Settings
Printer:
FLSun 3D Cube
Rafts:
Doesn't Matter
Doesn't Matter
Resolution:
.2mm
30%
Filament: Inland PLA Gray Post-Printing
It uses a 1/4" bolt to hold the camera. The alignment post is optional, and should be 4mm wide. There's a hole in the plate to receive it.
Category: Parts