Repair Element for RockBros Cycling Glasses
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick fix for broken RockBros glasses arm mount; glue in place with the arm closed for best results.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 181
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This 3D-printed element addresses a common issue with RockBros cycling glasses — the frequent breaking of the temple arm mount due to a design flaw. The part is designed to be glued in place using super glue, providing a quick and effective solution to restore functionality.
Installation Instructions:
The repair element should be glued with the temple arm in the closed position to prevent accidentally bonding the two parts of the glasses together. Apply super glue to the blue-marked areas shown in the reference image for optimal adhesion.
Print Parameters:
- Layer Height: Recommended 0.12 - 0.16 mm (for optimal precision and strength)
- Material: PETG, ABS, or ASA (recommended for durability and resistance to outdoor conditions)
- Infill: 100% (for maximum strength)