2.8 inch Pimoroni Pico display case - with 4 buttons

I bought one of these 2.8inch LCD displays (https://shop.pimoroni.com/products/pico-display-pack-2-8?variant=42047194005587) to use with a Pico W as I wanted a small, but capable bit of screen space to show some stats etc. It just plugs the Pico (2W in this case) into the back of the screen - and powers via the USB. 

The case itself is fairly basic - just a box that holds the display (and Pico) in the base, has a hole for the USB cable, and then I've added a slot at the back so that the box can be clipped into a mount if desired. The front has 4 button mechanisms for the 4 actuator buttons that come with the display, that either allow this to be used as a mini hand-held device (eg. simple games console), or just a way to toggle between modes, activate menus etc. I've used 4 M2 countersunk bolts to hold the front face on. 

I personally used this to pull data from an MQTT broker, and display it - but the application could be anything… 

It should print without supports, but I would recommend using a brim for the lid (which may need flipping so that the front face is down on the print bed). The fixings are sized for M2 threaded inserts (see my threaded insert tool holder model if that's of interest!).  

The threaded insert set I use can be obtained from Amazon here: https://amzn.to/3BFAJas, the inserts themselves are here: https://amzn.to/3DFTKtO. 

(Note: These are associate links, which means that they don't cost you any more, but I get a small cut if you purchase via these links. This isn't a big money-spinner, but I find it so useful to have sub-components linked in models that I download - so I know I'm getting exactly the right bits without much research, and it helps support my tinkering!).