Smart Fortwo 451 Intake Tube (Resonator Delete)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prototype air-box to throttle body intake tube for the Smart 451.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 943
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
This is a prototype of cold air intake for the Smart 451 that deletes the intake resonator. It's modeled it to have a consistent internal diameter along it's length and a smooth route for the air to travel from the air filter box to the throttle body. There is also a smooth transition for the crankcase breather hose. The Smart already has a cold air intake built in so I assumed using the stock air cleaner box would be superior to a cone filter hot air intake.
It's designed to be printed in TPU, but nothing too soft. I used Overture High Speed TPU, it has the perfect balance of rigidity and flexibility for the application.
Recommended settings:
- 2 wall perimeters
- 15% gyroid infill
- paint on organic supports for the exterior underside of the crankcase nipple
- supports optional for the arch shaped segment
I didn't have any tetrahydrofuran on hand to solvent weld the TPU segments together so I used Gorilla Super Glue Gel which is an SA glue. It's holding up well so far but it's not a long term solution for gluing the segments. The spine along the length of the tube is for aiding in visual alignment while gluing. Update: 7 months later of a daily commute and it's still holding up!
I tried printing it in one piece on my X1C, but it's shape doesn't lend itself to 3D printing so I ended up splitting it up into four segments for printing on my A1 mini. You can fit all four segments on one plate if you carefully arrange them.
My Smart has an exhaust leak at the flex pipe so it's already loud, however I can't tell if the printed intake tube is much louder than the stock setup. It doesn't feel more torque-y off the line but it definitely feels more rev happy. It could just be placebo though.
https://www.smartcarofamerica.com/threads/air-intake-dyno-comparison.152600/
Use at your own risk!