1 / 13
Alfa Romeo Giulietta battery cover dual color — zdjęcie 1
1 / 13

Alfa Romeo Giulietta battery cover dual color

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

some tweaking to oryginal model - proper logo placement, some adhesion improvements, dual color on single extruder

Ocena
0 / 5
Polubienia
8
Pobrania
77
Wydruki
0
Wyświetlenia
399
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Slighlty improved battery covers - with dual color   print  with one extruder  - details on YT channel  https://www.youtube.com/@make.anything .

 

How to print ?

In Prusa Slicer there  are tutorials  also 

on Cura  this is little cumbersome:

  1. Load both files

  , rotate logo to match orientation

2.  select all (CTRL+A) and select Center selected

3. When models match it loks solid - to move and reposition select merge !

then  logo will appear

4.  Search for Z-Hop - 1mm will suffice - tick boxes as on picture

Ungroup model  and…… select and…. omg - delete cover :)  (don't wory - it is fine for now)

5. set temps - best to print hot  initially  - that way small details will stick to bed. hot bed will keep plastic warm and malleable

Slice it (skirt is not neccessary - but it purges hotend - can be removed later) and save it as File1 or fileLogo or sth

then press CTRL+Z (undo) cover will be back  :) yay

6. select from below logo and delete it

 

Slice name as file02 or sth 

you are good to go !

 

Other logos may be little tricky to reposition  (not sure why they were exported  in differenet orientation yet. X-Ray may help to position  it correctly. when placed  ok - there should be no fuzzy, funny artefacts on lines 

have fun !

 

 

Gold inlay on black  “carbon look”  looks awesome 😍

 

Tagi