Pocket storage for insulin pen needles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small case to hold pen needles in packaging and a place to safely put the used needles.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 244
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Share Alike
A small, pocket sized holder for pen needles in packaging and a place to put the used needles until you can drop them in a proper receptacle.
The models should hold 1-4 needles in their packaging until needed, based on size selected. It will hold at least as many used needles until you can dispose of them properly. The used needle storage has a removable cap so that you can push them through into a receptacle with a pen or such without the risk of injury.
On the end opposite the removable cap is a sliding lid that holds the items inside and will allow you to use either section independently.
The 3 model is 97 mm tall and 30x46 mm in profile so it will easily fit in a pocket or purse. The 1 model is 37x30x46 mm.
The 1 and 3 models are shown in the photos.
I printed the 3 model in PET-G and it took me about 3.5 hours. It should print without supports in the orientation uploaded. The 1 model printed in just over 1.5 hours.
Models are available for 1 to 4 new needles in packaging.
If you find it useful, please post and rate.