Z Axis Lead Screw Cover for Creality K1 series
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protect your z axis lead screw from getting covered with debris that gets blown off the bed when the fans are running
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 205
- Wydruki
- 2
- Wyświetlenia
- 1080
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Standard Digital File License
This easy mod is a simple yet effective way to extend your lead screw service interval by protecting it from getting covered by debris that may get blown off the bed when the fans are running, especially during a nozzle wipe or a failed print.
Because the lead screws are greased, everything sticks to them, and this can cause z axis movement to become rough, resulting in print issues such as horizontal banding, or in some cases stopping the print due to a “z axis movement not smooth” error code
Compatible with stock K1 series beds (and all build plates)
Compatible with Advanced Nozzle Wiper for Creality K1 Series and it is recommended to install these mods at the same time (10-12mm m3 coarse thread self tapping screws recommended)
Print in ABS, ASA or better - it must be able to handle the heat from the bed and hotend.
If you have an upgraded bed, you may have to extrude the top face or scale it to fit. Move your nozzle to 1mm above the build plate (G1 Z1) to measure the height.