Joolz Hub2 Bag Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adaptor from a bag strap to the clips on many of the newer Joolz pushchairs.
- Ocena
- 4 / 5
- Polubienia
- 12
- Pobrania
- 124
- Wydruki
- 1
- Wyświetlenia
- 602
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
The opening for the bag strap is 26.5mm x 5mm.
Two are required. I'd recommend printing at 100% infill. Each clip is 5g of filament.
PLA+ seems to work fine, but this would be better printed with a more UV resistant material such as ASA.
This also work with the Joolz day, geo hub & aer.
I have also tested this with the maxi cosi prams with a similar attachment point, and it fits.
If you wish to modify the bag strap opening, open the .f3d file in Fusion 360, edit the sketch, which is the first item on the timeline and modify the two yellow highlighed values to your desired values.
Note photos are currently of Version 1.