1 / 6
Water Tray for Alex Ward Standard 6 cell tray — zdjęcie 1
1 / 6

Water Tray for Alex Ward Standard 6 cell tray

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple water tray 6 cell tray. May fit other pots. Try it on.

Ocena
0 / 5
Polubienia
2
Pobrania
32
Wydruki
0
Wyświetlenia
92
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Water Tray for Alex Ward (@wardy89) Standard 6 cell tray. 

https://www.printables.com/model/71854-seedmodulecell-tray-mk2-seedplug-tray

There are a couple of trays in the remixes. Why another one? I wanted to print faster and made a model with a thinner bottom and lower and thinner walls. I made ledges for ventilation and took a slightly different angle of the wall.

Printed with nozzle 0.4 with layer height 0.3, 3 walls. There will be no filling in this case, just pay attention, I increased the thickness of the walls. The picture shows everything. Printed PLA, just for beauty. PETG or ASA would be more suitable.

I would recommend reading the watertight [article](https://help.prusa3d.com/article/watertight-prints_112324) on prusa3d.com

Tagi