18650 2P battery case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
18650 battery holder including charging and step-up module
- Ocena
- 4 / 5
- Polubienia
- 31
- Pobrania
- 164
- Wydruki
- 1
- Wyświetlenia
- 1407
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Parts needed for this:
2x 18650 cell
1x TP4065 lithium charging module
1x MT3608 DC-DC step-up module
some flexible and solid copper wire
I needed a 18650 battery holder for my R/C Boat. This compartment also includes a TP4065 lithium charging module and a MT3608 DC-DC step-up converter. The output voltage can be adjusted up to 28V/DC. There is a small hole on the side of the model, where the potentiometer can be accessed. There are also some holes, to see the LEDs during charging. A M3 screw will self-thread itself in the corresponding hole. I charged both cells completely, before connecting them in parallel.
I will not take any response when cells catch fire, nor any other damages due to this build.