quadlock compatible phone holder for motorcycle (peugeot django)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a quad lock compatible phone-holder to mount on motorcycle windshield pipe (10mm diameter).
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 481
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Quad Lock Compatible Windshield Phone Mount
This phone holder is designed for motorcycle windshield pipes with a 10mm diameter (currently in use on a Peugeot Django). It is fully compatible with Quad Lock systems and accessories.
Pro Tip: If you have a larger diameter pipe, you can still use this mount by cutting a hole in the TPU seal according to the specific dimensions of your pipe for a custom fit.
Design Versions
There are two versions available depending on your setup:
phone_mount_v1: Designed to connect to a single pipe.
phone_mount_v2: This version connects to both pipes for increased stability. Note that for this version, the distance between the two pipes must be exactly x.
Print Settings & Materials
Since this part is intended for outdoor use and will face constant UV exposure, I highly recommend printing the body in ASA or PETG.
TPU Seal (Yellow Part):
Infill: 15% Gyroid pattern
Walls: 1 wall
Layers: 4 top and 4 bottom layers
Hardware Required: 2x M3 nuts and bolts.
Note: In the provided images, the yellow component is the TPU seal, and a Quad Lock vibration dampener has been attached for added protection.