BTS Keychain
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This keychain twists to form both the BTS and Army shapes.
It is best printed upside down at 45 degrees with the characters feet sticking up, as this requires the least supports. At 100% it is only 2" tall, so it is best printed on a resin printer. Suppose you could print at 200% and it might come out on FDM.
Make sure the exposed bottom end of the pop up element is well supported so that it can print the long overhang without internal supports. I did have one internal support on the one internal bottom corner, and a couple around the head. Rinse it out well to get an uncured resin out of the sliding and rotating gaps, otherwise when you finish curing it the parts may stick together during post curing.