SKR mini E3 V3 Full Case Upgrade

Here you can find all parts for making this upgrade. SKR Mini E3 V3 has a lot of features and a great motor driver cooling system. You can activate the sensorless homing feature easily and enjoy many more things like getting the iconic yellow duck from BTT.

I essentially remixed the model from E-leton which is also a remix from VeeVi. E-leton modified the original model adapting it for the SKR Mini E3 V3 and I just made some changes for easier installation so you are all covered.

I also created space for a 4010 fan in the case door file. It's a modification from the original Prusa MK2s door. If you don't want to use the fan you can simply use the original MK2s “RAMBo-doors.stl” file or the original MK3 “Einsy-doors.stl" file, they are exactly the same.

Once you print the files you can check this installation tips:

• Start by installing 3 M3 nuts in the back of the main case, the 4 M3 nuts for the extruder and bed clamps and the last M3 nut for the door.
• After that, you can mount the case to the frame with 2 M3 screws starting with the bottom one. I suggest you to use an allen key screw in the upper one because it will be inaccesible for a normal screw driver once you install everything in place. Remember to present your X axis cables in the according space for them before screwing the upper screw.
• Then I recommend you to use the bed and extruder clamps to secure all cables in place with 4 M3 by 10mm screws.
• You need to connect your extruder and heatbed to the SKR board before securing it in place because once screwed, you won't be able to insert the cable terminals easily.
• After securing the board in place with 3 or 4 M3 by 10mm screws, you can connect everything else, just double check everything before connecting your power supply.
• If it all runs smoothly, you can install your 4010 fan and mount your door with the hinges.

Enjoy!