1 / 6
Output of filament with a filter Mod for iDryer Unit
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Output of filament with a filter Mod for iDryer Unit
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 182
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This mod allows you to add a filter to the plastic outlet, as well as choose the outlet angle.
To build, you will need
1. Screw M3x8 - 4 pcs.
2. Magnets 6x2mm - 16 pcs.
