Solar Panel Target
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple easy to print target that is placed on a solar panel to help find the most optimum angle for solar…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 217
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple easy to print target that is placed on a solar panel to help find the most optimum angle for solar collection.
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 v2
**Rafts:**
No
Supports:
No
**Resolution:**
0.2mm
Infill:
20%
**Filament:** eSun PLA+ or PETG any
Notes:
I printed this simple sun target to help me aim my solar panels in a temporary manual setup. The target is stuck to the face with double sided tape, hot glue, or via a secondary clip. When the target is directly pointing at the sun there will be little to no shadow cast at the base. When the panel slightly off angle, the fins cast shadows that can easily be seen and adjusted. As this will be out in the direct sun light, I recommend a UV resistant filament like PETG.
As an Amazon Associate I earn from qualifying purchases.
If you don't have a place on the face of the panel to easily attach the target, I have also included an example clip that is specifically designed for Renogy 100 Watt panels. That link is an Amazon affiliate link!
As an Amazon Associate I earn from qualifying purchases. If you'd like to support my efforts, here is an Amazon Associates link that you can use to shop for whatever you need. Your purchases on items you need help me to continue this work.
Category: Electronics