1 / 2
Desk power strip mount / Montura para relgeta en escritorio. — zdjęcie 1
1 / 2

Desk power strip mount / Montura para relgeta en escritorio.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

2 brackets to mount a powerstrip to a desk / table.

Ocena
0 / 5
Polubienia
6
Pobrania
42
Wydruki
0
Wyświetlenia
247
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Share Alike

[English  version]

I wanted to mount a powerstrip to my deskt so my cables arent always twisting and collecting dust.

With this model you can mount it as you like: vertically, horizontal or upside down. The model fits an standart powerstrip and is bolted to the table.

Printed on PLA with 0.2 layer height (you can go higher if you want), 2 perimeters and no support (print it like it appears on the 2nd picture). Infill doesnt really mather because there is no gap between the perimeters.

Hope you find it helpful!! :)

[Versión en Español]

Quería montar una regleta a mi escritorio para que los cables no estuviesen siempre por medio, enredandose y cogiendo polvo.

Con este modelo podeis montar la regleta como queraís: vertical, horizontal o boca abajo. El modelo sirve para una regleta estándar y se atornilla a la mesa.

Está impreso en PLA con una altura de capa de 0.2mm (podeís subirla si quereís), 2 perímetros y sin soporte (imprimidlo en la orientación de la 2a imagen). El relleno realmente no importa, porque no hay hueco entre los perímetros.

Espero que os sea útil!! :)