Prusa XL vibration dampening feet TPU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prusa XL vibration dampening feet - TPU - Bambulab inspired
- Ocena
- 5 / 5
- Polubienia
- 44
- Pobrania
- 168
- Wydruki
- 4
- Wyświetlenia
- 835
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have remixed the Bambulab model for the Prusa XL.
You can simply put the shoes under the original ones. The assembly is very easy. You only need to lift the Prusa XL carefully.
A nice side effect is that the PrusaXL stands a little higher and you can now store accessories underneath.
The Prusa XL has most of the weight on the back, I recommend a 5th shoe in the middle back. You can print a copy of the original shoe with the vibration dampers together and mount it with a T-slot nut from Prusa and a M3x12 screw like the original shoes and then put the vibration damper underneath.
Just look at the photos, then everything should be self-explanatory.
Print recommendation:
Material: TPU 95A (Amazon Basics)
Infill: Cubic 15%
Perimeter: 2
Profile: 0.20mm SPEED