Frontrunner Rack Handle Mod for LED Lights (Slimline II)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Get some light into your Frontrunner handles with this print.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 142
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted to get some LED lights into my Frontrunner handles without actually hooking up cables on the roof of my van, so I designed a socket that holds watertight and battery-powered LEDs, which I bought off of Amazon.
The Frontrunner handle for which this mod works is the “Rack Handle Bracket for Slimline II” (= “Griff-Halterung für Slimline II Dachträger”),
Simply print the top part once and the bottom part twice. Push the top part into the Frontrunner handle and slide the two bottom parts in from left and right. Then just push in the LED light and you're done.
Personally, I printed this in PETG, so it does not degrade much outside and has a little flex.