Screw and Socket Driver Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Handle for hex shank screw or socket driver. There are 4 different files sized slightly differently for different fit tolerances.
The permanent fit is pretty tight, the drivers are meant to be tapped in with a mallet and are not meant to be removed.
The 101% profile is also a semi-permanent fit with a slightly easier installation, especially if your printer tolerances are not super tight. The drivers should be removable with pliers or a vice.
The 102% and 103% are a looser fit so the drivers can be removed by hand, but still tight enough that the driver stays in place.
Commercial licenses for selling physical prints of my designs are available via my MakerWorld page.