1 / 3
HP Dock G4 Cable to the Back — zdjęcie 1
1 / 3

HP Dock G4 Cable to the Back

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This mod gets the cable that normal is in the front to the back.

Ocena
0 / 5
Polubienia
2
Pobrania
32
Wydruki
0
Wyświetlenia
165
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution

For the HP Dock G4.
There is a small screw on the back where you can open the dock from the bottom.
Remove the 2 screws from the cover that holds the cable.

Print the model with support but exclude the small hole for the screw as it don't need supports.

Optional is the ring on the bottom for anti slip. I used this one. 
It is magnetic so for me it sticks very well to my monitor stand.

I printed with PLA .4 nozzle and Fuzzy skin.
Fuzzy skin thickness: 0.05 mm
Fuzzy skin point distance: 0.3 mm
 

Tagi