1 / 4
Magnetic Li-Po Battery Case (18650, 18350, 14500) — zdjęcie 1
1 / 4

Magnetic Li-Po Battery Case (18650, 18350, 14500)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Parametric battery case with magnetic closure and cell retention

Ocena
0 / 5
Polubienia
4
Pobrania
44
Wydruki
0
Wyświetlenia
202
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Share Alike

To make, print two copies of your desired battery size. Requires 3 magnets per half, two for closure and one for the tip. Put a magnet in only one tube per shell half, the other hole is for compatibility with button-top cells (the 14500 size also works for AAs).

This model is sized to fit 3/16" diameter x 1/16" height neodymium magnets, but you can check out the OpenScad model if you want to adjust tolerances or resize the model to fit your magnets or a different battery size. Sized to fit unprotected cells.
 

Tagi