1 / 3
Sliding Barn Door for HomeCube (Parametric)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
See the Gif for the door in action :)
I've provided the .F3D and .STEP instead of STLs because you will have to modify the dimensions based on your HomeCube size as well as the size of your acrylic panel.
BOM:
- I bought these cheap rails on amazon, quality was not really a concern since it's a door. I'm happy with the quality from these, it has a minor preload and the door doesn't droop at all.
(non affiliate): https://www.amazon.com/dp/B0BNQ6ZFPH - set of M3 screws + nuts for the linear rail attachments and printed portions.
- set of M4 screws and M4 T slot nuts to attach the linear rail to the aluminum extrusion.
- Acrylic 3.175mm or 1/8 inch Panel (optional ig, you can do a fully printed panel by editing the model)
- drill bits for M3 screw size
FAQ:
- Does the door slide around while printing?
- No, it is stiff enough to not slide because of slightly imprecise screw holes.
- Is it airtight?
- Not completely, but my chamber temperatures go up to 38 C with the door closed. I also put a blanket on it for ABS printing, and saw it go to 44 C with ambient temp around 20 C.
- I've designed the printed parts to surround the linear rail to lessen potential air leakage.