Removable Purge Bucket for Voron Trident
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple removable purge bucket for use with SW Blobifier on a 350 Trident.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 480
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is just a simple removeable purge bucket for the Voron Trident. Mine is a 350, so your mileage may vary. If it doesn't fit just let me know the length of the extrusion from the edge of your bed out and distance between edge of the bed and panel and I can make adjustments. I've also added the step file if you'd like to make your own remix.
BOM:
2x m5 roll in nuts
2x m5 bolts
4x 6x3mm magnets
Just press the magnets into the holes, adding a small amount of superglue will help keep them there. You'll probably want supports on the box itself, just make sure your supports are tuned well to be able to properly insert the magnets. As for mounting I mount mine in the front left of the printer if you're looking directly at the printer. There's a small portion of extrusion from the bed mount that juts out. If you mount there the box should be flush with the edge of your bed. Print out of ABS or something else temp resistant.
I added my blobifier config for those that want something preconfigured for a 350mm Trident.