Elven Princess Warrior - Hueforge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Elven Princess Warrior - Hueforge
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 53
- Wydruki
- 2
- Wyświetlenia
- 376
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial
Elven Princess Warrior - Hueforge
Sized so you can print the frame on a standard sized printer. See frame recommendation below.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 180x180mm in size
Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA PolyLite Dark Grey Transmission Distance: 1
PLA PolyLite Steel Grey Transmission Distance: 1
PLA PolyLite Grey Transmission Distance: 1
PLA PolyLite Pro White Transmission Distance: 5
This print uses 5 unique filaments
Swap Instructions:
Start with Charcoal Black
At layer #7 (0.64mm) swap to Dark Grey
At layer #12 (1.04mm) swap to Steel Grey
At layer #17 (1.44mm) swap to Grey
At layer #21 (1.76mm) swap to White for the rest.
I recommend this frame: https://www.printables.com/model/518556-parametric-frame-for-hueforge-filament-paintings
It's a great design and you can set it for any size hueforge print you want. You can use the free version of Fusion360 to create new sizes easily, don't be afraid to try it out even if you've never used Fusion360 before.
Enjoy!