1 / 8
Small Penrose kites and darts with improved snap fittings — zdjęcie 1
1 / 8

Small Penrose kites and darts with improved snap fittings

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Penrose kites and darts with 1 cm small side and hidden snap fittings. Liftable and displayable top and bottom up.

Ocena
0 / 5
Polubienia
2
Pobrania
9
Wydruki
0
Wyświetlenia
75
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

These are Penrose kite and dart tiles that fit together with hidden side snaps to enforce matching rules and to hold the tiles together into a liftable layout. When assembled, only the polygons show both top and bottom.

The big challenge was how to make snap fittings that could be printed without impossible overhangs but that also hold well. These adhere strictly to the 45° rule and are printable both right side up and upside down. As a result, they are limited to extending 1.5mm past the boundary of a 3mm thick tile. By combining this with complementary holes on on either side, the middle snap is effectively 3mm deep (a little less due to some final adjustment).

Kites and darts can be printed in different colors for contrast. Alternatively, tiles themselves can be printed in two colors by switching the filament.

I have provided a sheet of kites and darts that can be printed together with kites facing up and darts facing down. If you switch filaments during printing, kites and darts will have opposite colors both face up and face down. The sheet consists of 13 kites and 8 darts (Fibonacci numbers) that approximate the ratio of kites and darts in any extended layout.

The photos shown on this printable were made two sided by switching the filament.

This object was made in Tinkercad starting with polygons made in Inkscape and imported as SVG. Edit it online https://www.tinkercad.com/things/fBuInOVxkny-improved-penrose-kite-and-dart-snap-tiles

Tagi