Kingdom of Aer: Kingmaker insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Box insert for Kingdom of Aer: Kingmaker to keep cards from sliding around. Fits sleeved cards.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 26
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
Box insert for Kingdom of Aer: Kingmaker to keep cards from sliding around in the box. Fits sleeved cards.
I used Paladin's “Gawain” sleeves. Longer sleeves should be fine, but there isn't room for sleeves that are much wider.
I have this version of the game. It's currently the only version, but, ya'know, for posterity's sake, that's the one this is designed for.
The bottom is very thin, 0.5-1.4mm, so you may need to make some adjustments to your normal slicer settings if your first few layers aren't great. I tend to have rough first layers that get smoothed out after a few layers, so I did very thin layers for the first 0.5mm to fit as many layers in as possible so it had a chance to smooth out. You know your printer best, do what you think will work for you.