Keycap / Keysock for Mechanical Lock Add-On for Original Prusa Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keycap / Keysock to better Identify your Key for the Mechanical Lock, if you have a Printerfarm
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 89
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v3.0
https://help.prusa3d.com/guide/8-mechanical-lock-add-on_360812
https://www.printables.com/model/284122-mechanical-lock-add-on-printable-parts
We have two mostly identical Printers in our school, and both are in the Original Prusa Enclosure with the Mechanical Lock Add-On.
Both Printers are Color-coded (green & yellow)
So to better identify, i designed a keycap/keysock for them.
The small foot below the key is only there to support the keys weight during printing and obiously as to be cut away afterwards
IMPORTANT:
I've also added various tolerances + a tolerance test ranging from 0.0-0.5mm
So make sure, you print this BEFORE the final print is happening and you enclose your keys forever ;-)