IONIQ 5 Magnetic Sunglasses Bin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Another sunglasses storage solution for IONIQ 5 and similar cars.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 423
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wasn't satisfied with the other solutions for sunglasses storage for my IONIQ 5, so I made this variant, designed specifically around the larger measurements of my cheap sunglasses. This was designed to make it very easy to slip the sunglasses back in, without having to worry about particular placement. Print in PETG or another temperature-resistant material, since PLA will warp over time inside the car.
Just super glue some magnets into the spaces on the back, (I used 8mm x 1.5mm neodymium magnets from Amazon) and add some craft felt inside to keep the sunglasses from bouncing around.
I included the .f3d and .step files, for people who want to adjust the size of the bin or magnets. (If you use the .f3d file, all sizes are defined as Parameters.)