1 / 3
Desk Drink holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A desk drink holder that will fit, GFUEL shaker, yeti rambler (21oz), and any mug that is 85mm wide will fit.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 253
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
Description
I happened to need a drink holder for my desk at home and wanted to clear some space off of my desk, so I came up with the design. A few friends liked it and wanted the file, so I decided to post it for others.
It will hold the following:
- GFUEL Shaker,
- Yeti Mugs for, the most part( only tested with the rambler and one similar)
- any 85mm wide coffee mug
Printing Settings
- 3 walls, 15% infill
- brim
Bill of Materials:
- ¼ -20 x ¾ Countersunk screws ( x2) **The length does not matter; this is what worked for my desk due to the thickness of the material.
- ¼ -20 x __ mm Flanged inserts ( x2 ) ,***( only required if your adding onto a desk that has nothing yet to mount to.
URL: https://www.homedepot.ca/product/paulin-1-4-20-x-20-mm-flanged-insert-nut-zinc-plated/1000166379
Assembly:
- Print the hole layout piece
- mark out the holes and drill with a 5/16 bit to the depth of the insert you want to use
- Print the Holder standing up; I used tree supports, as shown in one of the last picture.
- screw in the insert and then screw the drink holder on and enjoy :).