1 / 3
HOTSWAP SPRITE EXTRUDER BTT LIS2DW / ADXL45 MOUNT for X and Y INPUT SHAPING
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to be able to hot swap the LIS2DW to make a calibration on X and Y on my Ender 3 V2 and his Sprite Pro Extruder
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 351
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (12)Powiązane
The mountig holes are for 3Ms heated inserts and a short m3 screw for the hot swap mounting point.
Just slide the Case with the sensor underneath the screw and tighten it down.
i also used a long m3 screw for stabilizing the Bracket for the bed. (Y-axis)
I made the “SPRITE_MOUNT_LEFT” for sliding / glueing into the “SPRITE_MOUNT”
to give it more stability,