Planet Unknown (deluxe version 2nd edition) board game insert w/ supermoon, neoprene mats, sleeved cards

########### Update 2025-07-22 ###########

Thanks to @Goaliebrain for discovering that the 1st edition box is only 100mm tall.
My box is the 2nd edition box which is 115mm tall.  I have added 2 models to hopefully address this height difference.  If all the bits don't fit due to the shorter height, I recommend printing 4 of planet-unknown-player-trays-1st-edition-box-2 x1.stl instead since it doesn't have the divider.

• planet-unknown-player-trays-1st-edition-box-1 x3.stl
• planet-unknown-player-trays-1st-edition-box-2 x1.stl

#####################################

########### Update 2025-03-30 ###########

Added file planet-unknown-spacer-planet-boards-x4.stl

For those without the neoprene mats, print 4 of the above model as spacers.  Place them on the bottom and then place the base game rule book directly on top of the spacers.

If you have the neoprene mats, you do NOT need to print these spacers.

I print the spacers with 3 walls, 0 top and 0 bottom, 7% infill with rectilinear.

#####################################

Board game organizer for Planet Unknown Deluxe version 2 with lid.  I got the all-in from the supermoon crowdfund.  My box is 115mm tall.  The first edition deluxe box is 100mm tall.  

It supports the following in one box:

• sleeved cards
• neoprene mats for planets, NOT supermoon neoprene mats (I don't have them)
• supermoon expansion

Cards are separated by type, slots for the following:

• Each civ (1-4)
• Objectives
• Events

The curved inserts hold each player's base starting items:

• 2 Rovers
• 6 Lifepods
• 2 Depot Indicators
• 5 Resource Trackers
• 1 Satellite Mini (Supermoon)
• 6 Salvage Tiles (Supermoon)
• 5 Terrain Patches (Supermoon)

The spacers are optional but helps keep things level.

The pictures show how it all goes in.

The file name tells you how many to print. x# means print # of these.
Example: planet-unknown-cards-obj-events-x2.stl
The name means print 2 of planet-unknown-cards-obj-events-x2.stl.

Your mileage may vary with vertical storage.

This was printed with bambu studio defaults except 15% infill and 3 walls.  Print the spacers however you want, i put zero top and bottom layer with rectilinear infill.

• .2mm layer height
• .4mm nozzle

If you have found this model helpful or fun, please "like" the model as it helps towards getting additional filament for printing. Also, if you enjoyed this model and want to see more, please consider buying me a coffee.

https://www.buymeacoffee.com/gameyspirits

If you like the lid clips, I got them from the below link:

https://makerworld.com/en/models/1123291-planet-unknown-w-supermoon-organizer-insert