Larger Swapfinity Bins with 1u labels

Announcements

Version 1.0.0 is out now! 🎉 It is the result of testing and continuously improving the design over the last few months. No breaking changes, labels stay the same.

New features/improvements:

• New: Lots of new variants with and without compartments
•  Improvement: improved stacking lip: bins fit better into the stacking lip on top and cannot hit the label shelf any more. Larger bins have bigger ‘stoppers’ so bins do not slide as easily over the border.
• Improvement: Labels are easier to remove through better spacing to the stacking lip
• Improvement: Improved inner bin geometry leads to much smoother surfaces and print movement.
• Improvement: Better support for smaller bins z < 3.

This model is part of the gridfinity compatible swapfinity series. You can check out all compatible models in this collection.🔗

Swapfinity 

This is a remix of my gridfinity compatible swapfinity bins. It features bins with x length > 1 and 1u wide labels, so you can reuse the labels for 1x1xZ bins with bigger bins!

You can find labels and all information on the main project.

Available Bins:

All bins are available in sizes x: 2-5, y: 1-5 (except 5x5) and z: 3,4,6,9

Need a differently sized bin? Let me know or generate your own with the available design files!

Printing:

⚠ The models were designed to be printed with a layer height of 0.2mm. I highly recommend to use 0.2mm as layer height. 

⚠ Slicers tend to hide the layer seems inside the label holder holes. Make sure to forbid seems inside the holes or use scarf seems to make the label fit well.

Bins: 

The bins are easy to print and do not need any supports.

I prefer to use PETG for them, but PLA works as well.

Version Log:

• 0.1.0: First public release
• 1.0.0
  • New: Lots of new variants with and without compartments
  •  Improvement: improved stacking lip: bins fit better into the stacking lip on top and cannot hit the label shelf any more. Larger bins have bigger ‘stoppers’ so bins do not slide as easily over the border.
  • Improvement: Labels are easier to remove through better spacing to the stacking lip
  • Improvement: Improved inner bin geometry leads to much smoother surfaces and print movement.
  • Improvement: Better support for smaller bins z < 3.
  • fully backwards compatible - no reprints needed

Update Log:

• 22.03.25: initial release
• 09.11.25: released version 1.0.0 with lots of improvements🎉

Future Plans:

• None yet :) feel free to make suggestions

Known Todos/Issues:

• None yet, let me know if you find something!

Credits:

• Zack Freedman, creator of gridfinity