Engwe T14 charger wall mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount for Engwe T14 charger (Electrony C120)
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 88
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- GNU General Public License v3.0
Wall mounted charger holder for Engwe T14 - Electrony C120.
Designed to print as easy as possible. On the side there is attached holder for XLR connector to keep stuff tidy.
Print settings
Print as your printer demands! It is technical part so feel free to print fast and with larger layer height. My settings were:
- Material: PLA
- Nozzle: 0,4mm
- Layer height: 0,2mm
- Walls: 2 perimeters
- Top/bottom: 4 layers
- Infill: 15% Gyroid
I can hold my hand on the charger during charging, so PLA should be able to withstand the heat. If the part softens and I'll have to reprint it, I will update the description.
Mounting
I would say there is not much to worry about as charger is pretty lightweight. Use 4mm screws and whatever fits your mounting location. I used 6x50mm dowels in brick wall.