Minisforum UM890 Pro - HSW (Honeycomb Storage Wall) mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A HSW mount for the Minisforum UM890 Pro mini-PC
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 691
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I've been busy assembling my HSW and the various mounts I needed, and noticed that there wasn't a mount already available for the mini PC I use as a software development server.
The model includes the word ‘FRONT’ on one side - this is, as you can imagine, where the front of the UM890 Pro will rest once slided into place.
The print orientation I found most effective was with the front facing the bed, and adding supports for the HSW mounting pegs (screenshot included in photos).
This model does not require any additional fasteners, and can be installed directly into the HSW panel.
I recommend printing this in PETG, as the model may need to flex slightly when installing it into a HSW panel.
Since this model is open-back, you may wish to consider installing some stopper pegs behind to reduce the risk of the system sliding out of the cage. For example, you may wish to consider installing a cable-routing peg behind which could serve the purpose of preventing the system sliding out accidentally while also routing cables.
DISCLAIMER
Although every effort has been made to ensure the safety and security of the mounting, the author of this model is not responsible for any damage, injury, mishap or other outcome or side-effect of using this model for any purpose, intended or otherwise. You assume all responsibility.