1 / 9
Back cover for PRUSA xLCD for MK4/MK4S Upgrade with (older) Version B — zdjęcie 1
1 / 9

Back cover for PRUSA xLCD for MK4/MK4S Upgrade with (older) Version B

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

For early adopters of the Prusa MK4 who have xLCD Version B and received their MK4S upgrade with no back cover

Ocena
0 / 5
Polubienia
8
Pobrania
34
Wydruki
0
Wyświetlenia
413
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I received my MK4S upgrade bundle this week and was disappointed that there was no back cover included. So I searched for existing models for it and only found some for the newer version A of the xLCD (why is version B the older one and version A the newer one??). Anyway, I found this and saw that the author had posted a step file. I modified it to fit my xLCD version B (rev. 0.12) and now it fits on my Original Prusa Enclosure with the brackets from the same author. The diffusor bar for the status LEDs that I used before fits here as well. The silver cylinder hex screws that are in one of the photos are too long. I used 4 M3x10mm screws to attach the brackets to M3 hex nuts inserted into the back cover. I hope this can help some of the other early adopters of the Prusa MK4 whose display backsides were left out in the cold by the upgrade. :-)

Tagi